COMPACT DESIGN
Small compact design allows for easy installation
BUILT-IN DUST COLLECTOR
MYBLAST comes with a built-in high performance dust collector.
Abrasives, such as glass beads, are ejected by compressed
air through blasting nozzles to clean various workpieces.
The spent abrasives are collected by the internal dust collector.
Large burrs are collected through the screen at the bottm
to the unit, and fine particles are collected by the cyclone.
The collected abrasives are then reused.


MY-30A
* Workability is good and speedy blasting.
* Small compact design allows for easy installation.
* Built-in dust collector.
* Floor space saving.
MY-30A
Blasting Nozzle (mm) Air Jet ƒΣ4~1, Nozzle ƒΣ8~1
Air Pressure Reguirel 0.2-0.6MPa
Electrical Power 1.2/1.3KVA/60/50Hz
Machine Dimensions (mm) 750W~1150L~2100H
Machine Weight (kg) 480kg

| Back | Page Top |


MY-24
* Operation is easy.
* Built-in dust collector.
* Small compact design and floor space saving.
MY-24
Blasting Nozzle (mm) Air Jet ƒΣ4~1, Nozzle ƒΣ8~1
Air Pressure Reguirel 0.4-0.6MPa
Dust Collector Bag Filter
Electrical Power 0.3kw~200/220V~50/60Hz
Machine Dimensions (mm) 750W~1150L~2100H
Machine Weight (kg) 480kg

| Back | Page Top |


TABLE TYPE CART TYPE
MY-40B MY-30E MY-40E

MY-30B MY-40B MY-30E MY-40E
Blasting
nozzle (mm)		 Air jet ƒΣ4~1 © © ©
Nozzle ƒΣ8~1 © © ©
Air pressure required 0.4-0.6 MPa © © ©
Dust collector Bag Filter © © ©
Diameter of table
and cart (mm)		 ƒΣ450 ƒΣ800 ƒΣ450 ƒΣ800
Maximum workpiece
dimension (mm)		 ƒΣ600 ƒΣ800 ƒΣ600 ƒΣ800
Electrical power 0.5kw 0.84kw 0.5kw 0.84kw
Machine dimensions 750~1150~2100 750~1150~2100 750~1150~2100 750~1150~2100
Compressor required More than 5.5kw © © ©

| Back | Page Top |


MY-40D
* Suitable for the following parts.
* Castings, and Plastic, Pressed, Machined,
or Sintered parts.

MY-30D MY-40D
Blasting nozzle (mm) Air jet 4ƒΣ,
Nozzle 8 ~1pc
(2 nozzle mode available)		 Air jet 4ƒΣ,
Nozzle 8 ~2pc
(4 nozzle mode available)
Air pressure
&
Consumption		 0.2-0.6MPa
abt.0.8 Nm3/mim (5kg/cm2)		 0.2-0.6MPa
abt.2.3 Nm3/mim (5kg/cm2)
Dust collector Bag filter
Air volume 4/5.5m3/mim
(Static pressure 260/320mmAp)
~50/60Hz		 Bag filter
Air volume 15m3/mim
(Static pressure 210mmAp)
Power 3 phases, 200V
approx. 0.9/1.2kw~50/60Hz		 3 phases, 200V
approx. 0.9kw
Compressor More then 5.5kw More then 15kw
Rotary Table Diameter (mm) 500ƒΣ 750ƒΣ
Rotation time 4.1/3.4min. ~50/60Hz
(180‹revolution)		 2.0/1.7min. ~50/60Hz
(60‹revolution)
Work Rotatin Tabd Dia.pcs (mm) 125ƒΣ~2pcs 180ƒΣ~6pcs (table optional)
Rotation 29/35rpm ~ 50/60Hz 11/13rpm ~ 50/60Hz
Load weight Max 10kg Max 10kg
Workpiece demension (mm) 125ƒΣ~100H 180ƒΣ~200H
Machining weight approx. 490kg approx. 900kg

| Back | Page Top |


MY-30G
MY-30G MY-30GA
(With loader)
Blasting
nozzle (mm)		 Air jet ƒΣ4~2 pcs ƒΣ4~2 pcs
Nozzle ƒΣ8~2pcs (Ceramic) ƒΣ8~2pcs (Ceramic)
Nozzle oscillation Crank Crank
Apron conveyer (mm) Blasting room
ƒΣ400~500		 Blasting room
ƒΣ400~500
Air supply 0.4-0.6 MPa 0.4-0.6 MPa
Dust collector Bag filter Bag filter
Electrical power 2.5kw~220/200V/
60/50Hz		 2.5kw~220/200V/
60/50Hz
Compressor More then 11kw More then 11kw
Maximum load 13 Liter/30kg (Max) 13 Liter/30kg (Max)
Loading device \ Air cylinder drive hopper
Machine weight approx. 800kg approx.
Machine dimensions (mm) 1000W~1300L~2650H 1000W~1838L~2850H

| Back | Page Top |


MY-30F
MY-30F
Nozzle (mm) Air jet 4ƒΣ. Nozzle 8ƒΣ~2pcs
(Advanced when blasting)
Tumbler unit Tumbler Capacity approx. 10 liters.
Real capacity 3 liter.
Rotation 8.3/1.rpm~50/60Hz
Chute Charging chute & Discharging chute
Dust collector Bag filter
Power 0.7/0395~60/50Hz
Compressor More then 7.5kw
Maximum load Less than 5kg and 3 liters

| Back | Page Top |




| Home | Airblast Series | Shotblast Series | Blasting Abrasivers | Contact Us |

copyrigte(c) 2008 SINTOKOGIO,LTD All Rights Reserved.